Publicité
FR
ES
- the need to identify safety measures to protect the operator that are based on an estimation of
exposure in the actual conditions of use (taking account of all parts of the operating cycle such
PT
as the times when the tool is switched off and when it is running idle in addition to the trigger
time).
IT
To reduce the impact of noise emission, limit the time of operation, use low-noise operating modes
as well as wear personal protective equipment.
EL
Take the following points into account to minimize the noise exposure risks:
1. Only use the product as intended by its design and these instructions.
2. Ensure that the product is in good condition and well maintained.
PL
3. Use correct application tools for the product and ensure they in good condition.
4. Keep tight grip on the handles/grip surface.
UA
5. Maintain this product in accordance with these instructions and keep it well lubricated (where
appropriate).
RO
6. Plan your work schedule to spread any high vibration tool use across a number of days.
EN
KEEP GUARD IN PLACE and in working order.
ALWAYS check the tool for damaged parts. Before further use of the tool, a guard or other part
that is damaged should be carefully checked to determine whether it will operate properly and
perform its intended function. Check for misalignment or binding of moving parts, broken parts
and any other condition that may affect the tool's operation. A guard or other part that is damaged
should be properly repaired or replaced by a qualified person The blade guard on your saw has been
designed to automatically raise when the arm is brought down and to lower over the blade when
the arm is raised.
The guard can be raised by hand when installing or removing saw blades or for inspection of the
saw.
NEVER RAISE THE BLADE GUARD MANUALLY UNLESS THE SAW IS TURNED OFF.
ACCESSORIES
The Miter Saw is supplied with the following accessories as standard:
• 48 Teeth blade (fitted)
• Dust bag
• Quickly workpiece clamp
3. GENERAL POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings instructions, illustrations and specifications
provided with this power tool. Failure to follow all instructions listed below may result in
electric shock,fire and/or serious injury.
212
212
• Support stand (fitted)
• 6mm Hex Key (stored in the Machine arm part)
Publicité
