Publicité
8. INTENDED USE
This miter saw is intended for cutting wood and analogue materials, it is suitable for straight cuts
having miter angles of up to 45. The saw is not designed for cutting frewood. Do not use machines,
tools and accessories for additional applications (see manufacturer's instructions) for works other
than those for which they are designed for. All other applications are expressly ruled out.
9. NOT INTENDED USE
If not intended use, the risk offre, electric shock and personal injury maybe further and
- The provisions contained in this guarantee are not intended to limit, modify, take away from,
disclaim or exclude any statutory guarantee set forth in any applicable provincial or federal
legislation
The Environment for operation:
The work area should be well and clean, do not operate this machine in explosive atmospheres,
such as in the presence offlammable liquids, gases or dust. and do not expose it to rain or wet
conditions.
10. OPERATING INSTRUCTIONS
Important: Be sure the supply is the same as the voltage given on the rating plate. Remove the
mains plug before carrying out any adjustment or servicing.
ASSEMBLY
Warning: To prevent the accidental starting that could cause possible serous personal injury,
ALWAYS assemble all parts to you saw BEFORE connecting it to the power supply. The saw should
NEVER be connected to a power supply when you are assembling parts, making adjustments,
installing or removing blades, or when not in use.
1. DUST EXTRACTION PORT (Fig 2)
1. Fit the dust bag (20) to the dust extraction port.
2. A vacuum dust extraction device can be connected to the dust extraction port. Use a suitable
vacuum adaptor if necessary. The dust extraction port has an internal diameter of 35 mm.
FR
ES
PT
IT
EL
PL
UA
RO
EN
221
221
Publicité
