Publicité
FR
ES
WARNING!
This product produces an electromagnetic field operation! This field may undersome circumstances
PT
interfere with active or passive medical implants! To reduce the risk of serious or fatal injury,
we recommend persons with medical implants to consult their doctorand the medical implant
IT
manufacturer before operating this product!
WEAR GOGGLES
EL
WEAR EARMUFFS
WEAR A BREATHING MASK
PL
WARNING! For your own safety read instruction manual before operating miter saw. Wear
UA
RO
EN
The tool must be used only for its prescribed purpose. Any use other than those mentioned in this
Manual will be considered a case of misuse. The user and not the manufacturer shall be liable for
any damage or injury resulting from such cases of misuse.The manufacturer shall not be liable for
any changes made to the tool nor for any damage resulting from such changes.
Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors.
The following hazards may arise in connection with the tool's construction and design:
• Damage to the lungs if an effective dust mask is not worm.
• Damage to hearing if effective earmuffs are not worn.
6. ADDITIONAL SAFETY INSTRUCTIONS FOR LED
Warning! The LED light beam potentially causes eye damage. Do not look or stare into the
LED beam.
218
218
eye protection. Keep hands out of path of saw blade. Do not operate saw without
guards in place. Do not perform any operation freehand. Never reach around saw
blade. Turn off tool and wait for saw blade to stop before moving workpiece or
changing settings. When changing the blade, replace and secure all quarding
to its original position and correctly before starting tool.Disconnect power (or
unplug tool as applicable) before changing blade or servicing. Do not expose to
rain or use in damp locations. To reduce the risk of injury, return carriage to the
full rear position after each cross cut operation.
Publicité
