Publicité
RACK MOUNTING
(rack mounting kit LDIMARK optionally available)
The optionally available rack mounting kit LDIMARK includes rack-mount brackets and connectors for installing a single IMA 30 installation
mixing ampli昀椀er, as well as for adjacently installing two ampli昀椀ers in a 19" rack. The set includes: 2x rack-mount brackets with short sides
A
, 1x rack-mount bracket with long sides
screws for the rack-mount brackets, 8x M3 countersunk screws for plate
A
A
Installing a single ampli昀椀er requires a rack-mount bracket with short sides
bracket with the short sides to the left or right side of the ampli昀椀er and the bracket with the long side on to the opposite side. Use the
included M4 昀氀at-headed screws for this.
A
To install two ampli昀椀ers alongside each other in a 19" rack, you will need the two small plates to join for connecting the ampli昀椀ers on the
, the two rectangular plates to join the ampli昀椀ers on the bottom
back
C
the screws on the back at the corresponding positions and use them to screw on the plates
below, on to the corresponding positions on the ampli昀椀ers with the included M3 countersunk screws. Use the M4 昀氀at-headed screws to
screw the rack-mount brackets with the short sides
A
12
B
, 2x small plates for the back
D
B
D
A
on to the sides of the devices.
C
C
C
, 2x rectangular plates for the bottom
.
A
and the rack-mount bracket with long sides
B
and the two rack-mount brackets with short sides
C
. Screw the connectors
, 4x M4 昀氀at-headed
D
C
D
B
. Screw the
A
. Loosen
D
, as illustrated
A
Publicité
