Publicité
GB
MT
Monitoring and controlling the
device
1.
You r tool s.
2.
Select the device from the list.
The device overview page is dis-
played.
3.
Select the desired setting on the
overview page.
Select help if you are unsure.
A dialogue box with a descrip-
tion for the relevant setting is dis-
played.
Transport
Always carry the device by the handle
(1).
Cleaning,
maintenance and
storage
Switch the device off before clean-
ing and remove the battery from the
device.
Cleaning
• Clean the device with a soft, dry
cloth to avoid scratching the cover
of the LED lamp.
• Use a brush to clean the gaps on
the device.
• Do not use any abrasive cleaning
agents or solvents. You can dam-
age the device irreparably.
• Do not use water or metallic aids.
Risk of short circuit.
Maintenance
The device is maintenance free.
24
Storage
Storage
How to store the product:
• clean,
• dry,
• protected against dust,
• protected against frost,
• out of the reach of children.
The ideal storage temperature for the
battery and device is between 0°C
and 45°C. Avoid extreme cold or heat
during storage to ensure the battery
output is not adversely affected.
Remove the battery from the device
before storage over a longer period
(see separate operating instructions
for battery and charger).
Disposal/
environmental
protection
Remove the battery from the device
and recycle the device, battery,
accessories and packaging in an
environmentally-friendly manner.
Waste electrical and electron-
ic equipment (WEE) must not
be disposed of with domestic
waste.
The symbol of the crossed-out
wheeled bin means that this product
must not be disposed of as unsorted
municipal waste at the end of its use-
ful life.
Directive 2012/19/EU on waste
electrical and electronic equip-
ment:
Consumers are legally obliged to re-
cycle electrical and electronic equip-
ment in an environmentally sound
manner at the end of its life. In this
Publicité
