Publicité
GB
Changing the blades
CAUTION! Risk of injury! Never
touch the blade on the cutting edge.
Wear gloves at all times when work-
ing with the blade.
Removing
► P. 7, item 13
– Loosen the blade screw (29).
– Remove the washer (30).
– Remove the blade (31) carefully.
Installing
NOTICE! Risk of damage to the
device! Pay attention to the rotation
direction of the blade (arrow).
– Carefully attach the blade (31).
– Put the washer (30) into place.
– Tighten the blade screw (29).
Storage, transportation
Storage
DANGER! Risk of injury! Store the
unit in such a way that it cannot be
started by unauthorised persons.
Ensure that no one is able to hurt
themselves on the stored unit.
NOTICE! Risk of damage to the
device! Do not stored unprotected in
a damp environment.
– Clean unit before storing.
– Store the tool in a dry and well ventilated
place.
Transportation
– When dispatching, try to use the original
packaging, if possible.
Storing the batteries
Note: The service life of the batteries
is longest when they are well main-
tained and above all stored at the
right temperatures. However, as the
batteries age, their capacity will
decrease, even if stored properly. A
significantly shorter operating time
despite a full battery indicates that the
battery is depleted.
Error/Fault
Device does not work.
42
• Storing the battery for a long period of
• Charge batteries before storing them to
• If the battery is stored for a long period of
• Store batteries in dry and well-ventilated
• Protect batteries from moisture and water.
• Store batteries in the following places if
• The optimum storage temperature is 10-
• Batteries must not be stored below 0 °C
• Do not expose batteries to direct sunlight.
• Disconnect batteries from the device
• Do not leave batteries permanently con-
Troubleshooting
What to do when something doesn't
work...
Malfunctions are often caused by minor
faults. You can easily remedy most of these
yourself. Please consult the following table
before contacting the vendor. You will save
yourself a lot of trouble and possibly money
too.
Cause
Battery not slotted in correctly? Slot battery into place.
time when empty may damage the battery
and greatly reduce its capacity.
avoid damage and deep discharging. The
optimum state of charge before storage is
approx. 70%.
time, regularly check the state of charge;
charge the battery if necessary.
areas.
possible:
– in rooms with smoke detectors;
– not in the vicinity of flammable or easily
combustible objects;
– not in the vicinity of heat sources.
20°C.
or above 40 °C as extreme temperatures
may cause the batteries to become dam-
aged.
before storage.
nected to the charger.
DANGER! Risk of injury! Unprofes-
sional repairs may mean that your
unit will no longer operate safely. This
endangers you and your environ-
ment.
Remedy
Publicité
