Publicité
Putting the player together
Connecting to the PHONO terminals and AC IN terminal
Preliminary steps to set up your turntable – Audio and power connections
Attention
Be careful not to tip the turntable over!
Please use the provided packing material as shown below to safely invert the unit during installation.
1
Lateral pressure cannot be applied to the insulators. To avoid accidental
damage please use the provided packing material, as shown below, to
safely support the turntable during installation.
① Take out the pad in the
bottom.
③ Put the pad into
cardboard box.
Position the pad
as shown.
2
Connect the supplied PHONO cable, PHONO earth (ground) lead, and AC
power supply cord.
(Red)
10
(10)
English
② Fold the pad along the creases on the back side.
④ Fold the front flap inside.
(White)
(Black)
Connecting the PHONO earth lead to
the player and amplifier.
Turn the terminal to the left
to loosen.
Insert the earth lug and
tighten the terminal
securely.
⑤ Rest the player in the box.
Proceed to
2
.
To avoid damaging the player,
cover the player contact area
with a soft cloth or a protection
sheet wrapping the player.
Insert the AC power
supply cord up to a point
just before the round
hole.
Pad
Publicité
