Bosch GRL 250 HV Professional Notice Originale page 20

OBJ_BUCH-757-011.book Page 20 Wednesday, February 1, 2017 8:34 AM
20 | English
GRL 300 HV/GRL 300 HVG
 The measuring tool is provided with two warning labels
(marked with numbers 20 and 21 in the representation
of the measuring tool on the graphics page).
GRL 300 HV:
LASER RADIATION
Avoid direct eye exposure
Class 3R laser product
IEC 60825-1:2014
< 5 mW, 635 nm
GRL 300 HVG:
LASER RADIATION
Avoid direct eye exposure
Class 3R laser product
IEC 60825-1:2014
< 5 mW, 532 nm
GRL 300 HV/GRL 300 HVG:
LASER
APERTURE
 If the text of the warning label is not in your national lan-
guage, stick the provided warning label in your national
language over it before operating for the first time.
Do not direct the laser beam at persons
or animals and do not look into the laser
beam yourself. This measuring tool gener-
ates laser radiation from class 3R according
to IEC 60825-1. Looking directly into the
laser beam – even from a greater
distance – can cause damages to the eyes.
 Avoid reflection of the laser beam on smooth surfaces
such as windows or mirrors. A reflected laser beam can
also cause damage to the eye.
 The measuring tool should be operated only by persons
that are familiar with the handling of laser devices. Ac-
cording to EN 60825-1, this includes, among other things,
the knowledge about the biological effects of the laser to
the eyes and the skin as well as the correct usage of laser
protection devices in order to avoid dangers.
 Always set up the measuring tool in such a manner that
the laser beams run far above or below eye level. This
ensures that damage to the eyes will not occur.
 Mark the area in which the measuring tool is being used
with suitable laser warning labels. This prevents per-
sons not involved from accessing the danger area.
1 609 92A 273 | (1.2.17)
 Do not store the measuring tool at locations to which
unauthorised persons have access. Persons not familiar
with the operation of the measuring tool can cause harm to
themselves and to others.
 When using a class 3R measuring tool, observe possi-
ble national regulations. Non-observance of these regu-
lations can lead to injury.
 Make sure that the area of laser radiation is monitored
or shielded. The limitation of laser radiation to controlled
areas prevents eye damage to persons not involved.
Battery Charger
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious
injury.
 This charger is not intended for use
by children and persons with phy-
sical, sensory or mental limitations
or a lack of experience or know-
ledge. This charger can be used by
children aged 8 and above and by
persons who have physical, sensory
or mental limitations or a lack of ex-
perience or knowledge if a person
responsible for their safety super-
vises them or has instructed them in
the safe operation of the charger
and they understand the associated
dangers. Otherwise, there is a danger
of operating errors and injuries.
 Supervise children during use,
cleaning and maintenance. This will
ensure that children do not play with
the charger.
Keep the battery charger away from rain or mois-
ture. Penetration of water in the battery charger in-
creases the risk of an electric shock.
 Charge only Bosch NiCd/NiMH batteries. The battery
voltage must match the battery charging voltage of the
charger. Otherwise there is a danger of fire and explosion.
 Keep the battery charger clean. Contamination can lead
to danger of an electric shock.
 Before each use, check the battery charger, cable and
plug. If damage is detected, do not use the battery charg-
er. Never open the battery charger yourself. Have
repairs performed only by a qualified technician and
only using original spare parts. Damaged battery charg-
ers, cables and plugs increase the risk of an electric shock.
Bosch Power Tools