Publicité
(3) Regular maintenance
Regular maintenance is required to ensure normal use
Note
Cut off the power and water supply before maintenance.
Direct water wash to the entire product is prohibited.
WARNING
Do not spray water or detergents on the toilet,
remote control or the power cord. Doing so
may cause electrick shock or fire.
During winter season, the water inside may freeze
after long periods of storage and non-usage.
Please take measures to prevent.
Note
Before connecting the product to the water supply and electrical outlet,
allow it to defrost for 30 mins in a warm indoor environment.
In cases of extreme cold/freezing/nozzle stuck in place, wrap the water
input line with a warm towel. Never pour hot water or use a hot dryer
directly on the toilet.
Maintenance of water filter
Keep area around water filter clear and away from harsh cleaners.
Do not install water filter next to any heat source.
Do not expose to long periods of intense sunshine or allow water
filter to freeze once installed.
Turn off water supply at shut off valve if intelligent toilet won't be
used for an extended period of time (ie: one month).
Replace water filter every 6 months.
Contact our Customer Service team on details for water filter
requirements.
(When filter elements become black or brownish).
32
Maintenance of water filter
Remove the expired filter cartridge by rotating counterclockwise. Install a
new filter cartridge.
Turn clockwise to lock it in place.
Maintenance of product surface and ceramics
Wipe dust or stains with a soft wet cloth
A wet soft brush, cloth or sponge may be used to clean the ceramic
areaDo not use abrasive cleaning solutions, such as alcohol, bleach,paint
thinner, cresol, benzene, gasoline, etc.
remote controller, and the washer will
automatically extend.If there is dirt in
the nozzle orifice, If there is dirt in the
nozzle orifice, you can gently hold the
washer with one hand and clean it with
a toothbrush with the other hand.
Do not use excessive force, otherwise
it will damage the nozzle.
When the nozzle is clogged, it is
recommended to replace it with a new
one.
Maintenance of the nozzle
Powered on and
not seated:
Press the
"Nozzle Clean"
button on the
33
Publicité
