Publicité
Deodorization
The function will operate automatically.
Deodorizing fan automatically turns on after
seating and turns off 3 minutes after leaving
the seat.
Auto Flush
Human body leaves the seat sensor
area after seating.
When the human body leaves the seat after
seating, it will automatically flush once.
Kick to Flush
Kick the "foot touch button".
To flush the toilet.
Do not kick with force or high frequency.
Sensing Cover Flip
Briefly press "Nozzle clean + H/C Massage" to
activate or deactivate the sensing cover flip function.
The seat cover automatically opens when the
human body approaches, utilizing microwave
induction components.
UV
After running the cleaning function, ultraviolet rays
sterilize the spray rod surface and start 10 seconds
after leaving.
After pressing the "stop" button of remote control or
the seat, the stop command is sent to immediately
stop the sterilization function of the ultraviolet
spray rod.
28
8.Battery Backup Installation
●Lift the toilet lid upward and unscrew the battery cover at the bottom using
a Phillips screwdriver.
Insert a 9V battery and cover it, tightening with a screwdriver. Secure the
toilet cover by placing it flat and pressing down. Following battery
installation, press the button to activate the power failure flushing function.
Attention:
Please ensure correct polarity when inserting the battery—observe positive
(+) and negative (-) markings. Avoid charging, disassembling, burning, or
mixing with old or different types of batteries to prevent leakage or
explosion. The battery box features moisture-proof functionality, so ensure
fixing screws are securely tightened for effective sealing. If battery
replacement is necessary, it is recommended to contact professionals for
assistance.
User-friendly Design
● Slow-closing lid/seat
Preserves the toilet's lifespan and allows for silent lid/seat closure.
●Damper
Installed damper provides a buffer function for the toilet cover and seat,
achieving a quiet closing effect.
●8 Layers of safety
Features 8 built-in safety measures to protect both the user and the product.
●Memory mode
After a power failure, restores water temperature, water pressure, seat
temperature, and wand position to mid-range. The night light defaults to on
after a power failure, and the on/off function maintains the last memorized
setting state.
● Pre-flushing
After seating, the product initiates a flush towards the seat to ensure
moistening of the seat wall.
29
Publicité
