Publicité
(2) Test before use
Test run (test all function buttons on the remote control and the
knob on toilet body.)
● Verify the normal operation of each
product function. Confirm the functionality
of rear wash, front wash (including spray
strength adjustment and nozzle position
adjustment), dryer, air temperature, water
temperature, seat temperature, and
nozzle clean. Ensure all specified actions
are functioning correctly.
● Perform the following operation to test
the rear wash process.
Cover the sensor area with your hand and turn the knob.
Code matching of remote controller
Code matching of the remote controller has been completed at
delivery of the product. In case of malfunctioning of the remote
controller, match the codes as the following method.
1.Pull off the plug of the product,
hold on the stop key till the level
indicator flickers and then loosen it.
Hold on the stop key
Level indicator flickers
3.The level indicator stops
flickering and is normally on.
All level indicators (in red) are
normally on
22
Seat sensor
point
2.Put the remote controller close to
the product and insert the plug.
4.Code matching
succeeds.
6. Remote Control Operation
The product has a built-in sensor in the seat. If user is not seated
properly, the rear wash, front wash and dryer functions cannot be
operated.
Bidet
Press "Bidet" key.
The water flow for washing is directed from
the front end of the nozzle, providing a
cleansing motion for the intimate areas of
females. Press the button again to deactivate
the washing motion.
Flush
Press "Flush" key.
The product performs a single flush.
Stop
Press "Stop" key to stop the product.
Auto-stop function activates 4 minutes after
initiating posterior and bidet wash.
Posterior
Press "Posterior" key.
The wash function directs a stream of water
from the front end of the nozzle to cleanse
the posterior through a washing motion.
Press the button again to deactivate the
washing motion.
Dryer
Press "Dryer" for drying washed part.
To dry the washed area, press the "Dryer"
button. To adjust the warm-air temperature,
press the "Dryer Temp." key. The current
temperature level will be displayed upon the
first press. Pressing it again allows you to
switch to temperature adjustment mode,
enabling you to set the desired temperature.
After cleaning, use toilet paper to gently
remove any water droplets. Then activate the
drying function to expedite the drying process.
23
Publicité
