Publicité
(4) Install the wax ring and brass floor bolts onto floor flange.
● Insert the 2 brass floor bolts flat head thru the appropriate slot in
the floor flange.
Use the provided plastic floor bolt washer to secure the floor bolts
on the floor flange.
Brass bolts should remain verticle FIGURE 5A. Install the wax ring
at the sewage outlet of the product FIGURE 5B.
FIGURE 5A
Floor Bolts
Wax Ring
Flange
(5) Preparing the toilet seat for toilet bowl installation.
● Hold both seat and cover vertical, pull upward to detach them
from ceramic bowl.
Move the seat forward as shown.
18
FIGURE 5B
Wax Ring
(6) Installing the toilet bowl onto floor flange
● Lift the toilet bowl with two people and gently lower it onto the
floor flange, aligning it with the guide markings as the reference.
Ensure that the floor bolts completely protrude through the bolt
openings on the bottom of the toilet bowl when viewed from
behind the seat.
● Press down firmly on the toilet bowl to allow the wax ring to
create a complete seal.
● Hand-tighten the nuts onto the floor bolts from the opening
behind the back of the seat to securely fasten the toilet bowl to the
floor.
Caution: Do not move the toilet bowl around once the toilet bowl is in
position.
It can damage the wax ring seal and result in water leakage.
(7) Connecting the water filter to shut off valve and connecting
braided water supply hoses.
● With the 3/8" male connection facing to the right, apply Telflon
tape and screw on adapter (supplied).
FIGURE 9A
FIGURE 9B
19
Publicité
