Publicité
9027970
EXTENSION CORD SAFETY
Use the proper extension cord for optimal safety and performance.
1.
Make sure your extension cord is in good condition.
2.
When using an extension cord, be sure to use one heavy enough to
carry the current your product will draw. An undersized cord will cause a
drop in line voltage, resulting in loss of power and cause overheating.
3.
Always replace a damaged extension cord or have it repaired by a
qualified person before using it. Protect your extension cords from
sharp objects, excessive heat and damp or wet areas.
ACCESSORIES AND
ATTACHMENTS SAFETY
This tool is compatible with specific accessories and attachments. Use
accessories recommended for this tool to avoid damage or personal injury.
1.
Follow instructions that accompany accessories. Use of improper
accessories may cause hazards.
2.
Use only accessories designed for this Drill Press to avoid injury
from thrown broken parts or workpieces.
3.
Do not use any accessory unless you have completely read the
instruction or operator's manual for that accessory.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace
the missing part before operating. Failure to do so could result in
a malfunction and personal injury.
WARNING! Do not plug the power cord into a power source
receptacle during unpacking and assembly. This cord MUST remain
unplugged whenever you are assembling or adjusting the drill press.
Failure to do so could result in a malfunction and personal injury.
CAUTION! To protect the drill press from moisture, a protective
coating has been applied to the machine surfaces. Remove this
coating with a soft cloth moistened with kerosene or WD-40. To
avoid fire or toxic reaction, never use gasoline, naphtha, acetone,
lacquer thinner or similar highly volatile solvents to clean the drill
press.
8
20 in. Floor-Mount Drill Press
For technical questions call 1-800-665-8685
V1.1
Publicité
