Publicité
V1.1
5.
Securely hold this tool using both hands. Using a tool with only one
hand can result in loss of control.
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to the tool safety rules.
If you use this tool unsafely or incorrectly, you can suffer serious
personal injury.
WARNING! DO NOT stand on the tool. If the tool is tipped or if the
cutting tool is unintentionally contacted, the operator could be
prone to serious injuries.
1.
Use the correct tool for the job. This tool was designed for a
specific function. Do not modify or alter this tool or use it for an
unintended purpose.
2.
Do not use the tool if any parts are damaged, broken or misplaced.
Repair or replace the parts.
3.
Ensure all guards are in place and operating correctly.
4.
Remove adjusting keys and wrenches before turning the tool on.
5.
Do not force the tool or attachments to do a job for which it was
not designed.
6.
Use proper extension cord. Make sure your extension cord is in
good condition. When using an extension cord, be sure to use one
heavy enough to carry the current your product will draw. An
undersized cord will result in a drop in line voltage and in loss of
power that will cause the tool to overheat.
7.
Disconnect tools when changing accessories such as blades, bits,
cutters.
8.
Make sure switch is in off position before plugging in the tool to
reduce the risk of unintentional starting.
9.
Ensure tool is never left unattended while the power is turned on.
Remain at the tool until it comes to a complete stop.
10. Always keep hands out of the path of a drill bit. Avoid awkward
hand positions where a sudden slip could cause your hand to
move into the drill bit.
11. Do not install or use any drill bit that exceeds 175 mm (7 in.) in
length or extends 150 mm (6 in.) below the chuck jaws. They can
Visit www.princessauto.com for more information
20 in. Floor-Mount Drill Press
9027970
5
Publicité
