Publicité
6.4. Cleaning
Cleaning the door must include also cleaning of the floor.
The equipment should be cleaned using cleaning agents that are compatible with the materials of the supplied product. For
the dilution percentages, refer to the instructions of the cleaning agents to be used.
Materials :
-
gasket : EPDM or natural rubber
-
rail, trolley, internal handle : zinc bichromated steel
-
external handle : anodized aluminium
-
guiding profile : anodized alu
-
guiding parts/opening side : composite
-
guiding parts/closing side : cupro alu
7 - MAINTENANCE
The final user must carry out periodical yearly or twice-yearly checks, or have them carried out, with keeping of a maintenance
register (In France : D. Safety at work - 89/655/EEC modified 95/63/EEC - art. 4b / CT R 233-1-2 and R 233-11-1).
Maintenance must be carried out by qualified staff.
When replacing a component, choose the right component from the manufacturer's after-sales service, and respect the
instructions of the different sections in this instruction manual.
Watch the main consumable parts:
Consumable part
Rollers
Guiding profile
Guiding parts
Floor gasket
Frame gasket
8 - SCRAPPING
Take all the European and national regulation texts into consideration, which deal with scrap and packaging waste. Examples:
Directive relating to scrapping, 75/442/CEE.
No item required dismounting and waste to a special center.
No material give off harmful vapors during combustion.
Regularity of maintenance
20,000 cycles or yearly
2,000 cycles or quarterly
2,000 cycles or quaterly
When black dust on floor or quarterly
When black dust on floor or quarterly
- 25 -
Criteria for scrapping
Rolling part uneven or fissures
Wear mark > 3mm
Fissures
Cut in rubber
Cut in rubber ( specially in the corner)
NM4440/NG-A
Publicité
