Max PowerLite AKHL1050E Manuel D'utilisation Et D'entretien page 6

8. KEEP WORK AREA CLEAN
Cluttered areas invite injuries. Clear all work areas of unnecessary tools, debris, furniture, etc.
9. KEEP CHILDREN AWAY
Do not let visitors contact compressor extension cord. All visitors should be kept safely away from work area.
10. DRESS PROPERLY
Do not wear loose clothing or jewelry. They can be caught in moving parts. Wear protective hair covering to
contain long hair.
11. DON'T ABUSE CORD
Never yank it to disconnect from receptacle. Keep cord from heat, oil and sharp edges.
12. MAINTAIN COMPRESSOR WITH CARE
Follow instructions for lubricating. Inspect cords periodically and if damaged, have repaired by authorized
service facility.
13. USE A SAFE EXTENSION CORD
In order to prevent an electric shock, use a 3-core extension cord with a 3-pole earthing plug and a 3-core
earthing plug socket. Make sure that the extension cord is in the good working condition. If the cord is
damaged, replace or repair it. The cord should have a sufficient capacity for the current running to the
product. The cord of an insufficient capacity will cause a voltage drop or an electric power loss, resulting in
overheating. The following table shows the cord size used depending on the cord length.
If the compressor is to be used outdoors, use an exclusive extension cord.
14. STAY ALERT
Watch what you are doing. Use common sense. Do not operate compressor when you are tired. Compressor
should never be used by you if you are under the influence of alcohol, drugs or medication that makes you
drowsy.
15. CHECK DAMAGED PARTS AND AIR LEAK
Before further use of the compressor, a guard or other part is damaged should be carefully checked to
determine that it will operate properly and perform its intended function.
Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, air leak, and any
other conditions that may affected its operation.
A guard or other part that is damaged should be properly repaired or replaced by an authorized service center
unless otherwise indicated elsewhere in this Instruction Manual. Have defective pressure switches replaced
by authorized service center.
Do not use compressor if switch does not turn it on and off.
16. HANDLE COMPRESSOR CORRECTLY
Operate the compressor according to the instructions provided herein. Never allow the compressor to be
operated by children, individuals unfamiliar with its operation or unauthorized personnel.
17. KEEP ALL SCREWS, BOLTS AND COVERS TIGHTLY IN PLACE
Keep all screws, bolts, and plates tightly mounted.
Check their conditions periodically.
18. KEEP MOTOR AIR VENT CLEAN
The motor air vent must be kept clean so that air can freely flow at all times. Check for dust build-up
frequently.
19. OPERATE COMPRESSOR AT THE RATED VOLTAGE
Operate the compressor at voltages specified on their nameplates. If using the compressor at a higher
voltage than the rated voltage, it will result in abnormally fast motor revolution and may damage the unit and
burn out the motor.
20. NEVER USE A COMPRESSOR WHICH IS DEFECTIVE OR OPERATING ABNORMALLY
If the compressor appears to be operating unusually, making strange noises, or otherwise appears defective,
stop using it immediately and arrange for repairs by an authorized service center.
6