Storing; Troubleshooting/Repairs; Important; Pneumatic Connections - Max PowerLite AKHL1050E Manuel D'utilisation Et D'entretien

10. STORING

For the whole time that the compressor is not used before unpacking it, store it in a dry place at temperature between –10˚C - +50˚C
and shattered away from weather.
For the whole time that the compressor is not used after unpacking it, while waiting to
start it up or due to production stoppages, place sheets over it to protect it from dust, which may settle on the components. The
operational efficiency of the compressor is to be checked if it is not used for long periods.

11. TROUBLESHOOTING/REPAIRS

The troubleshooting and/or repairs shall be carried out only by the MAX Co.,LTD authorized distributors or by other specialists.
IF SMALL TROUBLE HAPPENED...
Compressor no starting
If the compressor has trouble starting, check the following:
- Does mains power match that of the data-plate?
- Are power cable extensions of adequate diameter or length?
- Is power supplied to the electrical line? (sockets well connected, thermal-breaker, fuses in good condition).
Compressor not stopping
- If the compressor does not stop when maximum pressure is reached, the tank safety valve comes into operation. To repair the valve,
contact your nearest authorized service center.

IMPORTANT

- Do not unscrew any connection while the tank is pressurized - always check if the tank is pressure free.
- Do not do any jobs on the compressor unless you have disconnected the power plug.
- Temperature in operating ambient:0˚C - +40˚C.
- Do not aim jets of water or inflammable liquids on the compressor.
- Do not place inflammable objects near the compressor.
- During down-times, turn the pressure switch to position " 0 " (OFF).
- Never aim the air jet at people or animals.
- Do not transport the compressor while the tank is pressurized.
- Be careful with regard to some parts of the compressor such as the head and delivery tubes, as they can reach high temperatures.
Do not touch these parts to avoid burns.
- Transport the compressor, lifting of pulling it with the appropriate grips or handles.
- Keep children and animals well away from the machine operating area.
- If the electrical cable or plug are damaged, do not use the compressor and contact an authorized service center to replace the faulty
element with an original spare part.
- If the compressor is located on a shelf or on a top above floor height, is must be secured to prevent it falling while in operation.
- Do not put objects or your hands inside the protective grilles to avoid injury to yourself or damaging the compressor.
- Do not use the compressor as a blunt object toward things or animals, to avoid serious damage.
- When you have finished using the compressor, always remove the plug from the power socket.

PNEUMATIC CONNECTIONS

Make sure you always use pneumatic Hoses for compressed air with maximum pressure characteristics that are adequate for the
compressor.
19