Uline Metro Serie Mode D'emploi page 5

ASSEMBLY CONTINUED
14. Attach one bracket of wall anchor to back of top
of cabinet using two M4 x 20 mm bolts. Mark holes
on wall where plastic anchors will be located. Drill
holes using 5/16" drill bit. Mount remaining bracket of
wall anchor to wall with two M4 x 40 mm bolts and
two plastic anchors. Tighten cable tie to prevent
tipping. Repeat for remaining side of storage
cabinet. (See Figure 11)
Figure 11
Wall
Top
Completed Assembly
Back
1-800-295-5510
uline.com
PAGE 5 OF 15 1024 IH-10295