VP50/VP50C Settings
User Settings: Admin Not Enabled
As mentioned previously on Page 12, initializing the VP50/VP50C without enabling 'Admin and User' passwords will
configure the drive up in a Single Password, Single User setup. This configuration does not have access to any
Admin options or features. This configuration will have access to the following VP50/VP50C Settings:
Changing and Saving settings
•
Whenever settings are changed in
the VP50/VP50C Settings (e.g.)
Contact information, language,
Password changes, Admin options
etc..), the drive will prompt to
enter your password in order to
accept and apply the changes. (see
Figure 7.11)
Note: If you are at the Password prompt screen above and would like to cancel or modify your changes, you can do
so by simply making sure the password field is blank and Click 'OK'. This will close the 'Please enter your password'
box and revert back to the VP50/VP50C settings menu.
Figure 7.11 - Password Prompt screen to save VP50/VP50C setting changes
23