Publicité
Station order
You can choose the order of the DAB station list to be either Alphanumeric, Ensemble or
Valid.
Ensemble lists groups of stations that are broadcast together on the same ensemble. Valid
lists valid stations first, alphanumerically, then off-air stations.
FM radio mode receives analogue radio from the FM band and
displays RDS (Radio Data System) information about the station
and where broadcast.
•
Automatic station storage
To full scan, press "INTRO" remote key. The frequency display starts to run and scans the
FM full band. The found stations will be stored to the FM pre-sets.
•
Automatic and manual channel search
To automatic tune, press and hold "
and scans the FM band and stops at the next station.
To manual fine tune press the "
•
Presets storing and recall
Storing and recall of DAB stations to preset is same functionality as described in the internet
radio section.
•
Now playing information
While the stream is playing, the screen shows its frequency, or if RDS signal is available,
station name and any further RDS information such as program name, title and other
details. Stereo broadcasts are indicated with an icon at the bottom of the screen. To view
further information, press Info button on the radio.
Each time you press "INFO" button on the radio, another set of information is displayed,
cycling through Radio text, program type, frequency and today's date
•
Settings
Scan settings
Choose FM at first, it will go to a specific station playing. Then press "MENU" on the radio to
get above table.
By default, FM scans stop at any available station. This may result in a poor signal-to-noise
ratio (hiss) from weak stations. To change the scan settings to stop only at stations with
good signal strength, select "Yes" after choosing Strong station only.
Audio settings
All stereo stations are reproduced in stereo. For weak stations, this may result in a poor
signal-to-noise ratio (hiss). To play weak stations in mono, select FM weak reception: Listen
in mono only and then YES.
FM
" or "
" button. The frequency display starts to run
" or "
" remote key. The unit search in 0.05 MHz steps.
12
ICD2023 / English Instruction Manual
.
Publicité
