Publicité
15
SLEEP
* Press to set sleep timer.
16
CD
/USB/DAB/FM/BT/AUDIO
* Press to select the corresponding
source. (CD/USB/DAB/FM/BT/AUDIO)
17
RANDOM
* Press to play tracks randomly in
CD/USB.
18
TREBLE+/-
* Press to adjust the TREBLE in USER
mode.
19
PROGRAM
* Press to program in CD/USB and preset
channel in DAB, FM, internet radio and
Spotify.
10
* Long press to save preset channels.
PAIR
* Press to return to previous menu.
* Press and hold to activate the pairing
function in BT or disconnect the
21
existing paired BT device.
OK/
* Press to play/pause in BT/CD/USB,
internet radio and Spotify.
* To select or skip to subsequent menu
in BT/CD/USB and internet radio.
1. Press and slide the back cover to open the battery compartment of the remote control.
2. Insert two AAA size batteries. Make sure the (+) and (-) ends of the batteries match
the (+) and (-) ends indicated in the battery compartment.
3. Close the battery compartment cover.
Connect the supplied telescope or pig tail antenna and align it. The antenna delivers good
results in the DAB+ and FM range when a sufficient reception signal is available.
If you live in an area with poor reception and the reception is disturbed by dropouts or noise, we
recommend the use of an active or house antenna.
Connect the unit to a suitable power source using the power supply provided. After showing a
starting screen, it will enter the last used listening mode. When the unit is started for the first
time, the setup wizard will be launched automatically.
OPERATION YOUR REMOTE CONTROL
GETTING STARTED / SET UP
ICD2023 / English Instruction Manual
22
* Press and hold for fast forward in CD
and USB.
* Press to select the next track in Spotify,
CD and USB.
* Press to display channel list in DAB/FM
and internet radio.
* Press for fine tuning in FM.
* Press and hold for manual tuning in FM.
23
* Press to move down on the menu
screen.
24
* Press to mute or resume the sound.
25
CLOCK
* Press to set clock.
26
V+/-
* Press to increase/ decrease the volume
level.
27
TIMER
* Press to set the Timer.
28
DIM
* Select the brightness level of the display.
* Select the LED ambient lighting level and
color.
* Select the LED ambient lighting on or off
on Standby mode.
5
Publicité
