Publicité
6. Time zone/daylight
Set your time zone. If your country uses daylight saving and it is in effect, turn on the
Daylight saving option. (only available when Auto update from Internet is selected)
Manual update
If you set No update, the wizard prompts you to set the time and date manually. The date
and time are displayed as dd-mm-yyyy and hh:mm.
The active value appears as flashing. Adjust each value with the "NAVIGATE" knob. Once
the value is set, press the knob to continue setting with next value.
7. Network
Keep Network connected
Select this option when the unit should the network connection in standby keep, when the
function is confirmed, the unit wills faster connecting the internet and it is possible to switch
on the unit with the "OKTIV" app. The standby power consumption is slightly increased with
this function.
Scanning for the network
ICD2023 is compatible with all common network protocols and encryption methods. It
searches for the available networks and list them out for you.
For the wireless connection, you will be asked for input the
encryption in the next step. To enter the network's key, use the
"NAVIGATE" knob to move the cursor through the characters and
press "OK" to confirm. As each character is selected, the key is built
up near the top of the display.
There are three options accessible by tuning the navigate reel
back before the first characters – Backspace, OK and Cancel.
WPS encrypted network
WPS encrypted networks are identified by WPS at the start of the network name when the
ICD2023 searches the available AP. Use one of the following methods of connection: There
is the shortcut WPS key on the unit.
Push button
ICD2023 prompts you to press the connect button on the router. It
then scans for a ready Push Button Connect network and connects.
Pin
ICD2023 generates an 8-digit code number which you enter into the
wireless router, access point, or an external registrar.
ICD2023 / English Instruction Manual
7
Publicité
