Publicité
16 | English
Industrial cordless screwdriver
EXACT
– Quick-change chuck
C)
Weight
Protection rating
Rechargeable battery (not included in the
scope of delivery)
Recommended ambient temperature dur-
ing charging
Permitted ambient temperature during op-
D)
eration
and during storage
Compatible rechargeable batteries
Recommended rechargeable batteries for
maximum performance
Recommended battery chargers
A) Measured at 20–25 °C with rechargeable battery GBA 12V 6.0Ah
B) Limited performance at speeds < 50 %)
C) Depends on battery in use
D) Limited performance at temperatures < 0 °C
Values can vary depending on the product, scope of application and environmental conditions. To find out more, visit
www.bosch-professional.com/wac.
Noise/vibration information
Noise emission values determined according to
EN 62841-2-2.
Typically, the A-weighted sound pressure level of the power
tool is less than 70 dB(A). The noise level when working can
exceed the volume stated. Wear hearing protection!
Vibration total values a
(triax vector sum) and uncertainty K
h
determined according to EN 62841-2-2:
Impact tightening of fasteners of the maximum capacity of
2
the tool: a
< 2.5 m/s
, K = 1.5 m/s
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ac-
cessories or is poorly maintained, the vibration level and
noise emission value may differ. This may significantly in-
crease the vibration and noise emissions over the total work-
ing period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and accessories, keeping their hands warm, and
organising workflows correctly.
1 609 92A 9SK | (09.08.2024)
kg
°C
°C
GBA 12V 2,0Ah
GBA 12V 3,0Ah
GBA 12V 6,0Ah
Notes on Accuracy
The reduction in speed (especially below 50 %) can lower
the maximum torque. The increased speed when using
Power Boost may affect the accuracy and shut-off beha-
viour. The clutch may be released.
Machine capability tests are usually done at 600 rpm in ac-
cordance with VDI 2647.
Changes to the speed and/or torque may affect the accur-
acy.
2
The machine capability must be checked with the relevant
setting.
Rechargeable battery
Bosch sells some cordless power tools without a re-
chargeable battery. You can tell whether a rechargeable bat-
tery is included with the power tool by looking at the pack-
aging.
Charging the battery
u
Note: Lithium-ion rechargeable batteries are supplied par-
tially charged according to international transport regula-
tions. To ensure full rechargeable battery capacity, fully
charge the rechargeable battery before using your tool for
the first time.
12V-6-670
12V-4-1100
¼"
0.83–1.07
0.83–1.07
IP 20
IP 20
Li-ion
Li-ion
0 to +35
0 to +35
–20 to +50
–20 to +50
GBA 12V...
GBA 12V...
GBA 12V 2,0Ah
GBA 12V 3,0Ah
GBA 12V 6,0Ah
GAL 12...
GAL 12...
GAX 18...
GAX 18...
Use only the chargers listed in the technical data. Only
these chargers are matched to the lithium-ion battery of
your power tool.
12V-2-670
¼"
¼"
0.83–1.07
IP 20
Li-ion
0 to +35
–20 to +50
GBA 12V...
GBA 12V 2,0Ah
GBA 12V 3,0Ah
GBA 12V 6,0Ah
GAL 12...
GAX 18...
Bosch Power Tools
Publicité
