Temperature Setting - Helios AIR1-BE TOUCH Notice De Montage Et D'utilisation

Operating instructions
EN
Controller - AIR1-BE TOUCH
Timer: Programme weekly timer and holiday settings.
Ventilation mode: Select ventilation stage or activate timer.
Temperature setting: Set temperature setpoint.
Home 2: Overview, Time & date, Alarms, Display settings.

4 .0 .1 Temperature setting

Current temperature
Home 1
4 .0 .2 Ventilation mode
– For constant air flow / constant speed
Switch between
OFF
REDUCED
NORMAL
BOOST
TIMER
Home 1
OFF: No ventilation. The unit is in standby mode.
REDUCED/NORMAL/BOOST: The unit runs in the selected ventilation stage.
TIMER: The unit only runs according to the programmed schedule.
Go back to TIMER: After manual switching to OFF / REDUCED / NORMAL /
BOOST, the unit automatically returns to TIMER-based operation after the time
shown in the field.
– For constant air pressure
Switch between
OFF
NORMAL
TIMER
Home 1
OFF: No ventilation. The unit is in standby mode.
NORMAL: The unit runs at the setpoint specified in the configuration.
TIMER: The unit only runs according to the programmed schedule.
Go back to TIMER: After manual switching to OFF / NORMAL, the unit auto-
4
Increase / reduce or
set temperature set-
point (depending on
selected temperature
control mode)
Select when the unit
should go back to
timer mode.
"Never" means the
unit will not go back
to timer mode.
Select when the unit
should go back to
timer mode.
"Never" means the
unit will not go back
to timer mode.