Configuration; Air Control; Selected Functions; Temperature (Experts) - Helios AIR1-BE TOUCH Notice De Montage Et D'utilisation

Operating instructions
Controller - AIR1-BE TOUCH
activate application".

4 .2 .3 Configuration

"Configuration" - Same function as the commissioning assistant, but with exten-
ded scope and without query sequence. This may only be used by experts.

4 .2 .4 Air control

"Air volume setting" - The volume flow rate values can be changed and set while
the unit is running to adjust the unit to the application.

4 .2 .5 Selected functions

"Advanced overview" - Overview page with additional system information (cf.
Home 2).

4 .2 .6 Temperature (experts)

"Advanced temperature settings" - The temperature value is not set in this
mode, but rather additional expert settings, e.g. offset values.
4 .2 .7 Manual/Automatic operation (Manual/Auto)
"Test mode" - Individual functions, such as a fan or damper, can be manually
controlled in this mode.
The menus in Home 3 are described in the Installation and Operating
Instructions for the AIR1 ventilation unit . Observe these instructions for
necessary settings .
4 .3 Access rights
The following functions are password-protected:
• Ventilation mode (back to timer function) (Operator or Admin password
required)
• Temperature setting (Operator or Admin password required)
• Timer (Operator or Admin password required)
• Date/Time (Operator or Admin password required)
• Alarms
– Screen 1 (confirmation function) (Operator or Admin password required)
– Screen 2 (Admin password required)
– Screen 3 (Admin password required)
• Expert menus (Admin password required)
Enter the code for the corresponding access level to log in. The pre-configured
passwords are:
• Operator: 3333
• Admin: 1111
The access level will be kept for 5 minutes after logging in.
9
EN