Publicité
Names and Functions of Remote Controller
■ This remote controller controls the operation function and timer setting of the room air conditioner. The
operating range of the remote controller is about 23 feet. If indoor lighting is controlled electronically, the
range of control may be shorter.
Off Mode Sign
Mode Selector Button
Use this button to select the
operation mode. Every time you
press this button, the mode will
(Heat) ➞
change from
➞
(Cool) ➞
(Dry) ➞
(Fan) cyclically.
SleepSense Button
FrostWash Button
Filter Sign Reset Button
Smart Eco Button
Use this button to set the
Eco mode.
On Timer Button
Select the turn ON time.
Off Timer Button
Select the turn OFF time.
My Mode Button
LeaveHome Button
Backlight function
Backlight is to see the LCD readings in the dark.
●
On pressing any key, the LCD panel lights up for a period of approx. 10 seconds. After approx. 10
●
seconds the light automatically switches off.
The function is independent of all other functions of the air conditioner.
●
The backlight color is white.
●
Precautions for Use
Do not put the remote controller under direct sunlight and high temperature.
●
Do not drop it on the fl oor, and protect it from water.
●
If you press the Mode button during operation, the air conditioner may stop for about 3 minutes for
●
protection before you can start it again.
Signal Transmission
(Auto)
– 7 –
Invalid Operation Sign
Shown at invalid setting or operation
Transmission Sign
The transmission sign blinks
when a signal has been sent.
On/Off Button
Press this button to start
operation.
Press it again to stop operation.
Fan Speed Button
Select the fan speed.
Powerful Button
Silent Button
Temperature Button
Room temperature setting.
Value will change quicker when
you keep pressing.
Reset Button
Up/Down Button
Controls the angle of the
Horizontal air defl ector.
Left/Right Button
Controls the angle of the
Vertical air defl ector.
Wide Reach Button
Controls the angle of the
Vertical air defl ector.
Publicité
