Publicité
SilverCrest SPLK 200 A1
Then press the security button [5] on the other PowerLAN Adapter for less
than 3 seconds.
Software
The software on the enclosed CD is not required for use. However, the software
can be used to configure certain settings: To use the software, it must be installed
as follows:
Insert the supplied CD-ROM and the installation menu will open
automatically.
Install the software (Power Packet Utility) according to the directions on the
screen.
If the setup wizard does not automatically start when the CD-ROM is inserted,
then the auto run function of your CD drive is deactivated. Then proceed as
follows:
Click on the 'Start' button to open the Start Menu.
Click on the option 'Run...'
Insert the drive letter of your CD-ROM drive, followed by a colon and the
program name 'Autorun' (e.g. D:autorun).
Click on the 'OK' button to confirm the action.
62 - English
Publicité
