Publicité
SilverCrest SPLK 200 A1
Set-up
With the SilverCrest SPLK 200 A1 PowerLAN starter set you can instantly set up a
network. To do so, insert the PowerLAN adapter into an easily accessible mains
socket. Connect the network cable to the network socket [6] of the PowerLAN
adapter and the other end of the cable to the end device. Repeat the procedure
with the second PowerLAN adapter. The PowerLAN adapters will now
automatically establish a connection and you will be able to use the network
connection.
Please note: one PowerLAN adapter has a socket. Here you can connect
additional end devices.
58 - English
Do not use the PowerLAN adapter with extension leads as this
could disrupt operation.
In many cases it is not possible to set up a network and connect
multiple flats in one house as the electricity meter can act as a
barricade.
If the sockets in the rooms to be networked use various phases
of electricity it may be necessary to have a phase coupler
installed in the distribution box by an electrician.
Publicité
