Publicité
Close the camera door.
Make movements in front of the camera at several positions
within the area where you expect the game or subjects to be.
Try different distances and angles from the camera.
When the white motion indicator LED flashes in RED, it
indicates that the camera is able to sense the position.
However, if the LED doesn't blink, it means that the
position lies beyond the sensing range. (Note: The red light
will blink only when the motion is within the sensing area
of the central PIR sensor. The central sensor's sensing
angle of view is 60°. Each of the side sensors has a 30°
angle of view, which is only used to pre-activate the camera
and accelerate the triggering speed, there is no RED light
blinking whatever each of the side sensors detects motions.)
In these sensing tests, the camera will take pictures once
motion is captured. When you open the camera, the screen
shows the number of times triggered, you can review the
pictures on the screen.
The results of your testing will help you find the best
placement when mounting and aiming the camera. The height
away from the ground for placing the device should vary with
the animal size appropriately. In general, 3 to 6 feet is
preferred.
You can avoid potential false triggers due to temperature and
motion disturbances in front of the camera by not aiming it at
a heat source or nearby tree branches or bush (especially on
windy days).
Do NOT install the camera behind the glass window as that is
not possible to sense any motion. Avoid aiming the camera
toward to any glass objects.
18
Publicité
