Publicité
PIR
Sensitivity
Side
Motion
Sensors
Motion
Test
First Shot
Timelapse
Interval
redundant images. 0 means capture as
fast as possible.
Note: this option is invalid if Mode is
set as "Time Lapse".
Select the sensitivity of the PIR sensor.
Temperature affects the sensitivity.
The High setting is suitable when the
High
ambient temperature is warm or you
Medium
want to capture distant objects or
Low
capture more, and the Medium/Low
setting is helpful in cold weather.
Note: this option is invalid if Mode is
set as "Time Lapse".
Selecting On will activate the side
motion sensors. It brings faster trigger
speeds and helps capture fast moving
animals. When any of the two side
motion sensors detects a motion event,
On
Off
the camera will be pre-activated. While
the animal enters the detection area of
the center motion sensor, the camera
will start taking photos or videos.
Select Off to save batteries power.
This feature helps you aim the camera
at your target area. Please refer to the
details in Section 9.2.
Set the earliest shot time after Time
Lapse or Hybrid mode is enabled. If
Time:
you would like to get photos earlier, it
hh:mm
is recommended to set it later than the
current time.
13
Publicité
