Publicité
OFF mode the camera still consumes a little power. It's a good
idea to take the batteries out of the battery compartment if the
camera will not be used for a long time.
7.2. ON MODE
In the ON mode you can check and change the settings of the
camera with the help of its built-in screen. These settings,
found in the menu by pressing MENU key, let you change the
photo or video resolution, interval between photos, switch the
time imprint on, etc. (See more in Section 8 ADVANCED
SETTINGS).
On the screen display, you will see an information screen that
shows how many images have been taken, the battery level,
camera or video mode, etc.
Attention please: In the ON mode, the camera will
automatically enter SURVEILLANCE mode if there is no
operation (key pressing) within 5 minutes. Then the camera
will perform as your settings in the menu.
In the ON mode, you can connect the camera to a computer's
USB port to download your images.
7.3. SURVEILLANCE MODE
Any time after the batteries and SD card have been inserted,
you can switch on the camera. When the START button is
pressed, the camera will enter into the SURVEILLANCE
mode. If the Mode in the settings is set as "Motion Detection",
the camera will count down a 30-second delay and then be
ready to capture images. If the Mode is set as "Time Lapse",
there will be no 30-second counting down, and the camera will
be ready to enter Time Lapse.
10
Publicité
