Publicité
Once in the SURVEILLANCE mode, no manual controls are
needed or possible (the control keys have no effect). The
camera will take photos or videos automatically (according to
its current parameter settings).
TIP: You can press the START button again to wake up the
camera and reprogram your camera if required.
8. ADVANCED SETTINGS
The trail camera comes with preset manufacturer settings. You
can change the settings to meet your requirements. Once the
camera screen is on, press MENU key to enter/exit the menu.
Press the UP/DOWN key to move the marker, Press the
LEFT/RIGHT key to change the setting, and press the OK
key to confirm the change. Always remember to press the OK
to save the change. Otherwise, you will lose your new setting.
Parameter
Mode
Photo or
Video
Photo
Quality
Settings
(Bold =
default)
In Motion Detection mode, the
Motion
camera will take photos or videos once
Detection,
triggered. In Time Lapse mode, the
Time
camera will take photos or videos
Lapse,
periodically according to your preset
Hybrid
"Timelapse Interval" parameter.
Hybrid mode includes both above.
Photo
Video
Select whether still photos or video
Photo+Vid
clips are taken.
eo
Select desired resolution for still
48MP
32MP
photos. Higher resolution produces
Description
11
Publicité
