Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation Guide
f
Repeat step 5 until all of the dots disappear
The dot appears at the top left first and then moves towards the bottom right.
When all of the dots disappear, calibration is complete.
c
•
Check that there are no obstacles between the interactive pen and the Easy Interactive Function
receiver (
•
If you touch the wrong position, press the [Esc] button on the remote control to return to the
previous dot.
•
To cancel calibration, hold down the [Esc] button for two seconds.
).
44
Publicité
Chapitres
Table des Matières
