Attaching The Setting Plate To The Wall Plate - Epson EB-595Wi Guide D'installation

Installation Guide

Attaching the setting plate to the wall plate

a
Insert the hexagonal axis into the setting plate
b
Mount the setting plate to the wall plate
Insert the top of the hexagonal axis into the wall plate, and then insert the M8 bolt into the slot at the
bottom.
Caution
•
Do not wire the Touch Unit connection cable into the wall. If it is wired into the wall, it cannot be
connected to the Touch Unit.
•
Take care not to trap the cables between the setting plate and wall plate.
30