Publicité
1. Remove the Underbody panel.
a) Using a 7mm socket, remove (14) screws from underbody panel.
b) Using a T15 torx bit, remove (4) screw from underbody panel (4 each side).
c)
Using a flat screwdriver, remove (1) push-pin near of the wheel (1 each side).
(a)
(a)
©2024 Horizon Global Corporation- Printed in México
(b)
(a)
(c)
Sheet 5 of 24
76656NP
9-10-24
Rev. A
Publicité
