Publicité
Step 3:
Attach the handlebar (6) and computer (36).
1. Slide the handlebar (6) into the holder of handle post (5) sothat
the holes align and secure the handlebar (6) with screw M8x45
(45), Washers (46) spring washers (47) and cap nuts (48).
2. Put the computer (36) to the holder of handle post (5) and put
the plug of connection cable (34) into the socket from computers
(36) backside.
Insert the battery (Type "AAA"-1.5 V pencell) by watching for
the right polarity on the back of the computer (36). (The battery
for the computer is not included in this item. Please buy them at
your located market.)
Step 4:
Checks
1. Check the correct installation and function of all screwed and
plug connections. Installation is thereby complete.
2. When everything is in order, familiarise yourself with the machi-
ne at a low exercise units and make your individual adjustments.
Note:
Please keep the tool set and the instructions in a safe place as
these may be required for repairs or spare parts orders becoming
necessary later.
15
Publicité
