Hilti ST 1800 Mode D'emploi page 18

Electrical safety
Before beginning work, check the working area for concealed electric cables or gas and water
▶
pipes. External metal parts of the product could give you an electric shock or cause an explosion
if you accidentally damage an electric cable or a gas or water pipe.
Power tool use and care
Switch the product off immediately if the accessory tool jams. The product might twist off-line.
▶
Wait until the product stops completely before you lay it down.
▶
Description
Overview of the product
Chuck
@
Protective sleeve
;
Click connection between depth gauge
=
and power tool
Torque adjustment
%
Intended use
The product described is a hand-held electric screwdriver for fastening profile metal sheets, metal
sheets and sandwich panels in metal construction. The power tool is designed for driving and
removing screws in drywall installation work.
It is possible to use a stand-up tool extension for driving collated screws.
Main applications / torque settings
Application
Sheet metal to sheet metal
Sheet metal to steel profile
Sheet metal to steel beam
Sheet metal to timber
Fiber-cement board on steel profile
Fiber-cement board on steel beam
Fiber-cement board on wood
Sandwich panel to steel profile
Sandwich panel to steel beam
Sandwich panel to wood
Items supplied
Metal construction screwdriver, ST­DG 17 depth guage, operating instructions.
Spare parts, consumables and accessories approved by Hilti for use with the product can be
found at your local Hilti Store or online at: www.hilti.group | USA: www.hilti.com
13
1
Control switch lockbutton
&
Supply cord
(
Control switch
)
Forward / reverse switch
+
Depth gauge adjustment
§
Screw type
S­MD
S­MD
S-MS
S-MD 51 + S-MD 21
S-MD 53 + S-MD 23
S­MP 52
S-MD 55 + S-MD 21
S­MP 53
S­MP 53
S-FD 03
S-FD 05
S-FD 01
S­CD 63
S­CD 65
S­CDW 61
378502
Diameter Torque
in mm setting
4.2 1 - 2
4.8 1 - 8
4.8 1 - 8
5.5 8 - 13
5.5 6 - 11
6.3 4 - 12
5.5 2 - 7
6.5 8 - 14
6.5 14 - 18
6.3 6 - 12
6.3 12 - 15
6.5 12 - 18
5.5 2 - 7
5.5 2 - 9
6.5 5 - 8
*378502*