Publicité
To avoid malfunctions, damage and physical injury MUST be observed:
Work area and keep soil around the machine clean and free of oil, grease and residues of
material!
Provide adequate lighting in the work area of the machine!
The machine does not use outdoors!
In fatigue, lack of concentration or under the influence of drugs, alcohol or drugs, the
work on the machine is prohibited!
The MKS 180 may only be operated by trained waiting personnel.
Unauthorized persons, especially children, and not trained persons must be kept away
from the running machine!
If you are working on the machine, do not wear loose jewelry, loose clothing, ties or long
hair out.
Loose objects could get caught in the blade and Injury!
When working on the machine type of protective equipment
(Gloves, goggles, hearing protection, ...) wear!
The running machine should never be left unattended! Turn off the machine before
leaving the work area and wait until the machine is at a standstill!
Before maintenance or adjustments, the machine must be disconnected from the power
supply! Switch off the main switch before disconnecting the power (OFF).
Use the power cord never for transport or manipulation of the machine!
1.
On the device there are only few of them serviceable components. It is not necessary to
dismantle the machine.
2. Have repairs carried out only by an expert!
3. Accessories: Only use of HOLZMANN Accessories!
4. If you have any questions and problems to our customer service.
In the design of the machine following protective devices are provided:
Protective cover for the blade
spark arrester
11.4
Residual risk factors
Even if the machine is used as required it is still impossible to eliminate certain residual risk factors
totally. The following hazards may arise in connection with the machine´s construction and design:
Hearing, unless arrangements have been made by the user for hearing protection.
These risks can be minimized if all safety rules are applied, the machine is properly maintained and
serviced the machine as intended and is serviced by a trained service professional.
Despite all the safety devices and remains her good common sense and your appropriate technical
qualification / training on the operation of a machine such as the MKS 180 of the most important safety
factor!
12
ASSEMBLY
12.1
Preparatory activities
12.1.1
Scope of delivery
After receipt of the delivery, if all parts are in order. Subscribe to cause damage or missing items
immediately to your dealer or the shipping company. Visible damage must also be recorded
without delay in accordance with the provisions of the warranty on the delivery, otherwise the
goods shall be accepted as duly.
12.1.2
The workplace
Choose a suitable place for the
The selected location must ensure an appropriate connection to the electrical
12.1.3
Preparation of the surface
Eliminate the preservative
This can be done with the usual solvents. It no nitro solvent or similar means
water
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
machine;
Observe the safety requirements and the
which is
applied for corrosion protection of the parts without
ASSEMBLY
dimensions.
grid.
painting.
and
in no case use
18
MKS180_230V
Publicité
