Instructions Guide
EN
Remote Control operation range
The remote control's sensor on the front unit is sensitive to the remote control's
commands up to 4 metres away and within a maximum of 60° arc.
PLEASE NOTE: The operating distance may vary depending on the brightness of the
room.
Connection
The audio output (analogue) and optical out (digital) are available on the back of the
unit to connect A/V amplifier or HiFi system.
Unwind the antenna included to the desired length and insert into the 'Antenna' port
on the back of the unit.
Unwind the mains adaptor cable to its full length. Connect the end of the cable to the
DC IN socket at the DC IN socket at the rear of the unit and then insert the power
adaptor into the mains socket. Make sure the mains adaptor is firmly inserted into the
power socket. The unit is now ready to use.
Connecting the unit to any other power source may damage the unit.
To switch the unit off completely, unplug the power adaptor from the mains socket.
7