Publicité
Connecting using the WPS button on your router
Connecting using the WPS (Wi-Fi Protected Setup) button on your router is a quick
and easy way to connect your radio without having to use a password. Select one of
the following connection methods:
Push WPS Button
Press buttons w/s to select the option Push Button. Press the OK button to confirm.
A message will display on the screen, requesting you to press the WPS button on your
router- press to continue.
Note: Refer to your router user manual to identify the WPS button, if in doubt.
Press the OK button to confirm. The Majority Robinson 2IR will now connect to your
router. This may take a few seconds.
Pin (code number)
Press the w/s buttons to select PIN. Press the OK button to confirm. The radio will
•
generate an 8-digit code number, which will be displayed on the screen.
Refer to your router user manual to follow the WPS instructions, when using a pin
•
code number. Enter this code number into the wireless router to connect with
Robinson 2IR.
Press the OK button to continue.
•
Instructions Guide
EN
11
Publicité
