Publicité
Instructions Guide
EN
FM Operation
To switch the unit to FM Mode, press the MODE button on the remote control to access
Mode Menu. Press 7 / 8 button to select and press
the OK button to switch to FM Radio Mode. Alternatively,
press the FM button on the remote control to switch to
FM Mode.
The display will show the frequency.
Auto Scan
Press the SCAN button on the remote control to activate auto scan.
Alternatively,
-
Press and hold the 7 / 8 buttons to start searching for a station. Once a station has
been found, the scanning will stop automatically. The search may not stop at a station
with a very weak signal.
Manual Tuning
To search for FM stations manually, press the 7 / 8 buttons repeatedly until
your desired frequency is reached.
With FM Radio, it may be necessary to fine tune each station by pressing / buttons repeatedly.
Each press will adjust the frequency by 0.05 MHz. If reception is still poor, adjust the position
of the aerial or try moving the radio to another location.
26
Publicité
