Publicité
Instructions Guide
EN
Connecting using your wireless network password
When using a router with no WPS button, you will be asked to enter your password to
connect the Majority Robinson 2IR with your wireless network. Alternatively,
select 'SKIP WPS' to go straight to the password screen.
Press the w / s / 7 / 8 buttons to select each letter/number of your password.
Press the OK button to enter the selected letter/number.
Once the password has been entered, press the w / s / 7 / 8 buttons, to confirm by
selecting 'OK' on the right hand-side of the screen. It takes a few seconds to connect
with your network.
After your radio has connected, press the OK button to exit the setup.
Settings can be changed at any time in Menu-System Settings - Network -
Network Wizard
This instruction manual explains the basic instruction for operating this unit. Unless
otherwise stated, all operations described are based on remote control use.
System Settings
Press the MENU button to display the menu. Press the w / s buttons to select
System settings, and then press the OK button to confirm.
Equaliser
This system supports a variety of equalisers and sound effects.
Press the EQ button to access the equaliser menu.
Alternatively,
While in the System Settings Mode, press the w / s buttons to select
Equaliser and then press the OK button to confirm.
12
Publicité
