Publicité
Instructions Guide
EN
Initial Set-up
When you first connect the unit to the mains socket, the display will show the start-up
screen, followed by 'Language Menu'. To select the language of your choice, press w /
s buttons to find your preferred language. Press the OK button to confirm your
selection. Once the language has been selected, the privacy policy page will appear.
Please visit the website mentioned to view the details of the privacy policy. Press
the OK button on the remote control to confirm and move onto the next step.
1.
To launch the initial 'Setup wizard', press 7 / 8 buttons to select [YES].
Press the OK button to confirm.
2.
You can now select the time format. Choose the clock time format as per your
preferences, either to [12] or [24] hours. Press the OK button to confirm and
move onto the next step. Next, select which source (DAB/FM/ NETWORK/NO
UPDATE) the unit uses as a source to obtain and update the time and date. If
'Update from Network' is selected, proceed to the next step and select the
time zone. Choose 'Daylight Savings' by setting to [ON] or [OFF].
3.
On the next screen, you can specify whether the product should remain
connected to the network when on Standby Mode. Press 7 / 8 buttons to
select [YES], and then press the OK button to confirm.
4.
The Majority Robinson 2IR, will now scan for your wireless network, this may
take a few seconds until a list of all the wireless networks available appears on
the screen. Select the WLAN network you know and whether to use WPS (Push
Button/Pin) or Skip WPS to enter the password using the displayed keyboard.
10
Publicité
