Bosch BCH3 Serie Manuel D'utilisation page 18

en Operation
¡ You can delay the natural wear by using
the following measures:
– Only charge the appliance in the tem-
perature range between 3 °C and
40 °C.
– Only store the battery in the temperat-
ure range between 0 °C and 40 °C.
– Do not store the battery for an exten-
ded period of time if it is fully charged
or fully discharged.
Ope r a t i o n
Operation
Ope r a t i o n
Assembling the appliance before us-
ing for the first time
→ Fig. 3 - 6
Charging the battery
Note: The cordless vacuum cleaner can
only be charged and used with the correct
hand-held device inserted.
→ Fig. 7 - 8
Note: The power supply unit on the char-
ging cable and the appliance heat up while
charging. This is normal and harmless.
Tip: To check that the battery is full, briefly
disconnect it from the mains and then re-
connect it. The status display then lights up
white.
Vacuuming with the cordless vacuum
cleaner
→ Fig. 9 - 11
Vacuuming using the hand-held
device
→ Fig. 12 - 14
Vacuuming with accessories
→ Fig. 15 - 23
s e r v i c i n g a nd Cl e a ni n g
Cleaning and servicing
To keep your appliance working efficiently
s e r v i c i n g a nd Cl e a ni n g
for a long time, it is important to clean and
maintain it carefully.
18
Cleaning the appliance
Requirement: The appliance is switched off
and the charging cable has been un-
plugged.
Remove the hand-held device and the
1.
accessory nozzles.
Clean the appliance and the accessory
2.
using a soft cloth and a commercially
available plastic cleaner.
→ Fig. 24
Emptying the dust container and
cleaning the filter unit
Requirement: The hand-held device is re-
moved from the vacuum cleaner.
→ Fig. 25 - 30
Cleaning the power brush
31 35
→ Fig. -
Note: The brush roller features a cleaning
function. When operating the brush roller
on carpet, your appliance automatically va-
cuums the cut threads and hairs after more
than 30 seconds.
Tr oubl e s hoot i n g
Troubleshooting
▶ Repairs to the appliance should only be
Tr oubl e s hoot i n g
carried out by trained specialist staff.
▶ Only use genuine spare parts when re-
pairing the appliance.
The appliance is not working.
The battery has not been charged.
▶
Charge the battery.
→ "Charging the battery", Page 18
Appliance is not working and the status
display lights up red for 10 seconds.
Over-/under-temperature protection is
activated.
Switch off the appliance and disconnect
1.
the appliance from the power supply.
Wait until the appliance has reached
2.
room temperature.