Publicité
E
N
G
L
|
S
H
Power and
Sound
Controls
Power
if the car is not running yet, turn the key in the ignition until the accesso-
ry indicator lights.
Press PWR to switch on the power.
Press PWR again to switch off the power.
Note: When power is switched on for the first time, greeting words are
displayed. To cancel this display, press D(DISP) button once.
SFM,
HUG
Volume
Press "VOLA" or "V VOL' to increase or decrease volume.
aa
0 to 40
Press "VOL A" or "VVOL" for more than a half second to sequentially
change numeric levels on the display.
SeHDB (Super High Definition Bass)
Especially for rock music, the bass-sound will be more powerful.
e Press HDB to be able to listen to high-definition bass.
e Press HDB again to return to the normal tone.
Attenuator
e Press ATT to decrease volume to about 1/10 of the previous level.
e Press ATT again to cancel.
Volume Level
Note: This unit is equipped with anti-volume-blast circuit which serves as an automatic volume level
adjuster so that you will not be deafened with sudden loud volume.
This system operates as below. When PWR
is first pressed to switch on, the volume level is low. After
that, the volume level gradually returns to the level when the switch was turned off last time.
Anti-volume-blast circuit is not effective when volume level is lower than position 20 at the display.
CQ-FX35EUC
Publicité
