Publicité
Installation Procedures
1. Secure the Mounting Collar ©.
Insert Mounting Collar Q) into the car's dashboard, and bend mounting tabs out with a screwdriver.
...
Mounting Tab
Se
se
we
es
"
N
Dashboard
Make sure that the
lock lever is flush
with the mounting
collar (not projecting
outward).
Screwdriver
2. Secure the rear of the unit.
a) Check the electrical connection by referring to these operating instructions.
b) Connect the Mounting Bolt ©, using a suitable wrench.
®© Mounting Bolt ge
2
we
c) Insert the unit into Mounting Collar (D and push it in until "click" is heard.
d) Secure the rear of the unit to the car by either of the two recommended methods.
Unit
Unit
E Using the Rear Support Strap ©)
Affix one end of the Rear Support Strap @) to the rear of the unit, and the other end to the Fire Wall
of Car, or some other metallic area.
@ Using the Rubber Cushion (Optional)
(If there is an existing Rear Support Bracket on the Fire Wall of Car.)
Cover Mounting Bolt © on the rear of the unit with Rubber Cushion, and mount it into the existing
Rear Support Bracket.
Fire Wall of Car
Rear Support Bracket
(existing on the car)
+ ammo
Rubber Cushion (Optional)
\
A
@) Tapping Screw
ay
& (2) Hex. Nui
"
Y
O Mounting Collar
\ @ Mounting Collar
CQ-FX35EUC
23
Publicité
