Publicité
Instal lation
G U ide
continued
raA-rgqg2am
3. a) Plug the Power Connector ©.
b) Insert the Trim plate @.
© Trim plate
4. After installation reconnect the nega-
Ne
tive (—) battery terminal.
To Remove the Unit
a) Remove the removable face plate. (See page 25.)
b) Remove the trim plate with a screwdriver as shown in the figure.
Trim Plate
Screwdriver
c) Pull out the unit while pushing two lock levers using a screwdriver.
d) Remove the unit pulling with both hands.
Lock Lever
Publicité
