Publicité
TH—-rowzm
Cassette Tape Player Basics contiues
Metal Tape Mode
è Press 1 (MTL) when playing metal or chromium dioxide (CrOz) tapes.
è Press 1 (MTL) again to cancel.
Note: Playing non-metal tapes in MTL mode causes high frequency
imbalance, which affects tone quality.
TPS Operation (Tape Program
Search)
@ Press 3 (TPS) to activate the tape program search mode.
TPS
PLAY
â
@ From the current selection, decide which program you want to select.
Now, press ">>" several times forward (up to 9 programs) or press "<4"
several times backward (up to 8) to select the corresponding program
number.
(Fast forward)
(Rewind)
EX1. To select the current program again
TOC
OLFLIA
press 3 (TPS), and press "4" once.
TPO
RENG
EX2. To select the 1st program backward
TPG
QREN!
of the current selection, press 3
i
~
v
(TPS) once,
and press "#4" two
times.
EX3. To select the next program,
press 3
TPG
FF
7i
(TPS) and press ">" once.
|
EX4. To select the 3rd program forward of
+
the current selection, press 3 (TPS)
once, and press ">>" three times.
Q) Press 3 (TPS) again to cancel.
Notes:
The TPS mode may not work correctly in the following cases. This, however, does not mean that the unit is
defective.
e There is an interval less than 4 seconds or having a high level of noise or hum between programs.
è There is particularly low-level passage during the program.
"For Inserting a Cassette Tape"
If you insert into the unit a cassette with a loose tape caused by forcing it into cassette with a finger or the like,
the cassette may not be properly reproduced.
In such a case, eject the cassette, make the tape tight, then
insert it back into the deck.
CQ-FX35EUC
Publicité
