Publicité
In-rOozm
26
Installation Guide continuea
To install the Removable Face Plate
C Fit either of the right or teft hole in the face plate to the main units pin, and fit it to on the other side while
pushing it.
security
indicator
(2) After fitting the face plate holes, move the face plate up and down a few times to make sure that it has
been fitted securely.
contact
Caution:
1. Before removing the removable face plate, make sure the power is off.
2. This removable face plate is not water-proof. Do not expose it to water or excessive moisture.
3. Do not remove the removable face plate, while driving your car.
4. Do not place the removable face plate on the dashboard or nearby areas where the temperature rises
to high levels.
. Do not touch the contacts on the removable face plate or on the main unit, since this may result in poor
electrical contacts.
. If dirt or other foreign substances get on the contacts, wipe them with a clean, dry cloth.
. When the front panel is opened, do not force it down and do not put anything on it since these may
result in damage to the unit.
CO-FX35EUC
Publicité
