Télécharger Imprimer la page

Adler europe AD 7709 Mode D'emploi page 7

Masquer les pouces Voir aussi pour AD 7709:

Publicité

19. The radiator should only be placed on a flat, stable surface
20. Before removing the plug from the socket, always turn off the heater and turn the
thermostat knob to the minimum position.
21. Do not use the heater in rooms with high air humidity - bathrooms, showers, swimming
pools, etc. Humidity may cause a short circuit and damage the device.
22. The operating heater must be supervised and within sight at all times. When leaving the
room where the heater is operating, always turn it off. If the heater is not working, always
remove the plug from the socket.
23. Do not connect the heater to an automatic shut-off device, such as a thermal control
device or timer.
24. Flammable materials, e.g. furniture, bedding, paper, clothes, curtains, etc., should be
kept at a distance of at least one meter from the heater.
25. Do not cover the device during operation or place any objects on it. Do not use the
device to dry clothes.
26. The power cord cannot be laid above the radiator and should not touch or lie near its hot
surfaces. Do not place the fan heater under an electrical socket.
27. Heating surfaces may heat up to temperatures higher than 60 °C. The fan heater
should be placed in a place where children and animals do not have access to it.
28. The device cannot be installed or used in vehicles.
29. There are parts inside the appliance that may be hot or cause sparks. Do not turn on the
Heater in places where materials such as gasoline, paint or other flammable substances
are used or stored.
WARNING: Do not use this heater in small rooms where there are people who are unable to
leave them by themselves, unless constant supervision is ensured.
WARNING: To reduce the risk of fire, keep textiles, curtains or other flammable materials at
least 1 m away from the heater air outlet.
DESCRIPTION :
1. Switches of the mode / switch-key
3. protecting net
Note: the first time you can receive the smell of burning. This is normal, and after a short time the smell should disappear .
1. Turn on the power cord into an electrical outlet .
2. Select the operation mode of heater with switches (1):
I - Enabled switch 400W
I + II - Enabled switch 800W
CLEANING AND MAINTENANCE
1. Never immerse the device in water.
2. Wipe the exterior walls with a damp cloth.
TECHNICAL DATA
Voltage: 220-240V ~50/60Hz
Power: 800W (400+400)
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste
bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may
effect the environment. Do not dispose this appliance in the common waste bin.
ALLGEMEINE SICHERHEITSVORSCHRIFTEN LESEN SIE AUFMERKSAM WICHTIGE
ANWEISUNGEN BEZÜGLICH DER SICHERHEIT DER BENUTZUNG BEWAHREN SIE
Bei Verwendung des Gerätes zu gewerblichen Zwecken werden die Garantiebedingungen
geändert.
2. Immersion heaters
4. Fuse of the vertical position
DEUTSCH
DIESE FÜR DIE ZUKUNFT AUF
DEUTSCH
7

Publicité

loading